New Powder Coating Tech

Meister Werks European and Import powder coating department is now back up and running. Our new powder coating tech just started on Thursday and is already learning the ropes very well. This is his first powder coating job (with help). I would say it turned out perfect.
Powder coat is a coating process that is applied to raw metal with a special powder application gun. This process uses low air pressure to disburse the powder while electrostatically charging the powder as it comes out of the powder coating gun.
Need something powder coated? Call 425-254-0627 or email us at info@meister.us.com for a quote or information. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.
/by

Brake fluid test

Brake fluid moisture is over the allow content on this #VW #Jetta #TDI. Moisture in the hydraulic braking system will introduce a series of issue. This can cause master cylinders and calipers to fail, which can lead to costly repairs. Also, under heavy breaking conditions, the moisture can actually boil, turning to steam, causing the brakes to feel spongy resulting in unsafe braking conditions.
 
If you feel that your vehicle may need a brake fluid flush, call us to make an appointment, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.
/by

2003 Mercedes E320 W211

A 2003 Mercedes E320 W211 chassis came in and put into service mode. We also performed a 100 pt inspection for some additional service.

To make an appointment, call 425-254-0627 or email us. #MeisterWerks European & Import is located one block south from #TheRentonLanding in #Renton, WA.

/by

A Quality Oil Filter is Important

,

A Quality Oil Filter is Important

At Meister Werks, we only use the highest quality oil filter on your vehicle. In this demonstration you can see the difference between high quality and low quality oil filters.

Both filters were removed from the same car, using the same oil. However the interval was drastically different. The one on the top left is a quality oil filter manufactured by Mann, a German company. The other filter pictured has clearly collapsed, which makes it much less effective at filtering oil. These lower quality oil filters can also start disintegrating and get in your oil system, which creating larger problems down the road. The bottom right filter was only used for 1,000 miles, while the other one was used for over 5,000 miles.

Despite what the dealer or manufacturer recommends, we suggest changing your oil and filter at 5,000 miles on all your vehicles. Some manufacturers recommend changing the oil and filter every 10,000 miles, this is a national average and does not take into account our local climate, the driver’s driving style, or the manner in which the vehicle is used. For example, a vehicle that is used mostly for short trips in stop and go traffic means you may need your oil changed more frequently, such as 3,000 miles. Some people who do a lot of long distance freeway driving might be able to go longer than 5,000 miles. Our standard recommendation is 5,000.

At Meister Werks, we help you keep track of your vehicle’s oil service intervals and make sure your vehicle is in tip top shape with our courtesy 30 point inspection. We also use the highest quality oil and filters on the market for your European or import vehicle. Sometimes a quick change oil service company seems convenient, however they might not use quality parts or proper oil which can result in damage or breakdowns and they may not perform inspections which could uncover additional maintenance and repairs your vehicle needs.

Contact us today and get your oil and filter service appointment. To make an appointment, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

/by

Open Saturdays

Meister Werks Open Saturdays

Our shop, open Saturdays

Did you know that Meister Werks is open Saturdays?

We know your work schedule may make it difficult to get your vehicle in to get serviced during standard business hours. This is why we are open until 6pm on weekdays, and on Saturdays from 10am – 3pm! We also have a key drop box to make it convenient to drop of your vehicle any time, before or after work.

Need a loaner? We have you covered, no extra charge! When scheduling your appointment, just mention that you would like to reserve courtesy our loaner car.

To make an appointment, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

/by

2005 Mini Cooper S Fog Light Install

2005 Mini Cooper S Fog Light Install

Wiring

Last Friday we completed a fog light install on Lori’s 2005 Mini Cooper S (Slick). Lori really wanted something unique for her car. We went through the Hella catalogue and spent a good amount of time looking for the perfect lights that were under her budget. She then decided on the Hella 500 Series black magic halogen driving lamp kit, due to the look and styling that would complement Slick.

Building the custom bracket

Custom Brackets

Before receiving the kit we knew that there may be some custom modification or fabrications that to do to get these lights to fit the way she wanted them to. After receiving the kit, Lori dropped off the car and Luke started the mock up. Next, we determined that a simple bracket mount was all we needed to get the lights to line up

Wiring

properly. We then carefully measured, drilled, and tapped the holes in the bumper and rebar. After that we mocked up the bracket, supplied by Hella, with a piece of

Custom Bracket

16 gauge cold rolled steel to create a custom mount. After that, we measured, marked and drilled all the holes. Keenan then took over and media blasted the paint off of the Hella brackets and welded them to our custom mounts. Some more minor sandblasting took place to get them prepped for powder coating. He powder coated the brackets black to match the styling of Slick. After all of that, they were ready to install.

Mounting and Wire Holes

Wiring

While Keenan was building the brackets, Luke stared to wire the head lights to the Mini. We ran the harness under the dash with a hidden switch. Then he wire tucked the harness though the engine compartment and though the car’s re-bar. Two small holes in front of the bracket mounts allowed us to access the headlight harness for a nice and clean install.

Completion

After everything was installed and wired, we aimed the fog lights to line up with the headlights. Lori can request us to re-aim the lights if they are not to her liking. As you can see the install went well and it is exactly the style she was looking for.

If you would like fog lights installed on your car, call 425-254-0627 or email us to make your appointment. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

Mounting Brackets
Front Head On
Covers on
Side
Headlights & Fog Lights
Just Fog Lights
Just Fogs Top
Just Fogs
All On
Fog lights
Custom Bracket
Building the custom bracket
Wiring
Wiring
Mounting and Wire Holes
Covers

 

/by