Meister Werks European & Import in Renton, WA, one block south of The Renton Landing did some custom work last week. We worked on this Mercedes Benz SL500. The customer was leaving on a road trip and wanted to get a few things done before the trip.
We installed the customer’s new wheels and tires and lowering arms on the leveling sensors. This allows the car’s factory air suspension to measure the height lower and will set the car at a lower stance. After installing the leveling arms, we did a four-wheel alignment, which make the alignment centered to avoid any excessive wear that occurs after lowering the Mercedes.
We also installed an Ex-Lip Pro kit on the front bumper and side skirts. Quick detail and some tire shine helped the Mercedes Benz look brand new.
When we finished we performed at courtesy thirty-point inspection on the car. We found a few minor things the customer should be aware of. The more critical item was the brake fluid had a moisture content of +4%. The moisture content can never be above 2%, 0% is the best. We informed the customer that he really needed a flush the brake fluid to prevent any damage to the brake master cylinder or brake calipers. Moisture can break down the system, causing corrosion and make the brakes feel spongy.
http://www.rentoncarrepair.com/wp-content/uploads/2016/11/MW-logo.png00Meister Werkshttp://www.rentoncarrepair.com/wp-content/uploads/2016/11/MW-logo.pngMeister Werks2017-10-28 18:56:562017-10-28 18:56:56Mercedes Benz SL500 Custom Work