,

Unitronic Performance Software & 2019 Fall Specials

Unitronic Performance Software & 2019 Fall Specials

Meister Werks is having a sale on all Unitronic Performance Software. Come in to get a performance tune on your VW, Audi or Porsche and get our $99.99 oil change special and free windshield wipers.

We are also having a $199.99 winterized coolant flush special to get you ready for the upcoming winter.

Meister Werks specials are good until the end of November. Performance software ends October 7th.

 

 

UNITRONIC FALL SALE • ENDING SOON

SEPTEMBER 24 TO OCTOBER 7, 2019
Save $100 or 10% on New Unitronic Performance Software*
Save 10% on Unitronic Exhaust Systems
Save 10% on Unitronic Intake Systems**
Save 20% on Unitronic MQB Inlet

*$100 or 10% OFF with the purchase of a NEW ECU or TCU Unitronic Performance Software. Not applicable on upgrades. Cannot be combined with any other promotions on the same transaction. ECU and TCU purchases are considered separate transactions.

** Excludes carbon intake systems.

To make an appointment for your performance tune and oil change, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA, across the street from The Boeing Store and on west side of the Paccar / Kenworth plant.

 

 

2.0T Reinforced Oil Pan – Now Available

Meister Werks 2.0T Reinforced Oil Pan

Meister Werks 2.0T Reinforced Oil Pan is designed for lowered or air bagged vehicles. These pans will prevent you from rubbing though the steel OEM pan and prevent damage to the oil pan. These pans will save your oil pan drain and bung from being disfigured if you scrape. Our reinforced oil pan have 3/16″ / 5mm steel plates welded to the pan and are also designed to bend incase of a hard impact.

This pan can take heavy impacts, however these impacts may damage the pan. The pan WILL save your engine. We design these pans this way so the full impact transfers to the hot roll steel plate and not to the engine block. This will prevent the block from being damaged.

Power Coated Pan & More

Our pans are also powder coated wrinkle red. We do this incase you do his something the oil will be visible and you will be able to see if the pan is leaking.

If your car does not have a oil sensor, you have the option to add one. We can also provide you with bolts and silicone gasket.

Click here to order your pan today.

Financing Now Available!

Lending Now Available at Meister Werks!

Financing now available at Meister Werks. MW have partnered with Snap and Lendmark. We offer these solutions so we can get your car back on the road and help out our customers keep their cars in tip top shape. We understand, sometimes repairs are financially difficult to get done. With these solutions it makes it easier to break it down over a longer period of time.

With Snap, they offer up to $3000 in financing for your car repairs, maintenance or custom work. No credit checks needed. They will also authorize up to 10% additional for the amount you are approved for as well. After your car repair is complete, all you have to do is pay the $39 processing fee and we will handle the rest. When you pick repaired vehicle up, the payments are made directly to Snap. You can choose to pay, weekly bi-monthly or monthly. The money is then directly withdrawn from your bank account.

Lendmark does it a little differently and does require a credit check. However your interest may be lower and there is no cap on what they will lend. They also have a portal very soon and you will be able to get approved within 15 minutes.

Contact us or call 425.254.0627 if you have any questions.

Painting Brake Calipers

Painting Brake Calipers

This week we performed some custom work, painting brake calipers on a 2008 Maserati Ghibli Q4. The process takes about 12 hours to do it the right way. Prep is key to making these calipers turn out like this. 1) Removing as much brake dust, dirt and grime and 2) High quality products.

First we will remove the wheels, brake rotors and pads. Next we do prep, lots and lots of prep. We can not do enough prep. If there is any brake dust on the calipers, the primer will not adhere correctly and you will see it. We also mask the entire car, incase of over spray,. We also mask the suspension components, ABS / sensor wires and brake fluid lines. After all the prep and masking is done, we spray 3 coats of acid based self etching primer on the calipers.

We let that set up and cure per the manufacture’s instruction, then start painting the brake calipers. Painting brake calipers takes time. Applying many light coats is the another key to a quality finish. The paint we use is a ceramic based high temp paint (900º) that will hold up to the heat. We let that set up for many hours before starting on the next step. When the paint has sets up, we install the Maserati decals. We use 3m cast vinyl that has a very long life, UV stable and is extremely thin. The clear coat will protect the decals and will last the life of the calipers. Lastly, we spray the calipers with ultra gloss, glamour 2 part clear coat. Again, many coats is the key to this amazing finish.

After everything cured over night, we were able to reassemble the brakes. We check the brakes and make sure everything is functional, exactly like when the vehicle arrived at the shop.

If you would like your brake calipers painted with the same results, contact us. Call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

 

 

 

Performance Tune – 2018 Golf R

Performance Tune – 2018 Golf R

Performance Tuning the Golf R

Today we installed a stage 1+ performance tune on our customer’s 2018 Volkswagen Golf R. The procedure is simple and takes about an hour of time for us to complete each tune. The new performance tune will give him an additional 83hp / 70 Ft Lbs of torque, with no other modifications needed. This tune will also optimize the 1/4 throttle range, so while driving in traffic or with the cruise control on, he will see better fuel economy. Just as long as he keeps his foot off the throttle.

Tuning the 2018 Gold RThe customer also has an Automatic Shifting Manual Transmission (ASMT or DSG) in his Golf R. With the engine performance tune, it requires an additional tune for the transmission control module. Not only does it need this for the additional horse power, but it also optimized the shifts timing and removes the gear kick down. Kick down happens when breaking or slowing while turning. This is a common complaint from owners with a DSG transmission.

In just under a two hours, our customer now has 375hp with 350tq and will be getting fuel economy. Additionally, he purchase a Uniconnect+ cable which will allow him to upgrade to a stage 2 at home, scan his car for fault codes and clear them if needed.

For more information, you can go to the Unitronice’s website to see what we can do for your vehilce. To make an appointment for a performance tune, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

 

Need to contact us for a repair after hours?

Meister Werks Repair, 24-7

At Meister Werks, we are always available for our customers if you have an urgent repair. To message us after hours you can go to our google page on your mobile devise, 24 hours a day, 7 days a week. You can also email us and we will reply as soon as possible.

If you are towing in your vehicle, you can use google messagingemail or contact us via our contact page. No need to get an approval. Just tow or bring in your vehicle and drop it off in front of our shop. We would be happy to look at your car the next business day and get you back on the road.

To contact us during business hours just call on our main line, 425.254.0627 or email us. If we don’t pick up, please just leave a message and we’ll get back to you promptly.

To make an appointment, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

About Us

The owner and of our company, Dave Meister, has always been a car enthusiast. Since age 16, he has had a passion for modifying and working on European cars.  What is now Meister Werks began in 1997, with Dave manufacturing and selling custom gauge faces to fellow car enthusiast and friends with VW, Audi, and Porsche vehicles.

As our business has grown over the years, our products and services have expanded as well to keep up with customer demand. Now a full service shop, we will take the time to explain your vehicles’ needs to ensure you have a confident and positive experience. To provide you with the best experience possible, we only hire staff with the widest knowledge and best work ethic. Our passion for excellence has resulted in satisfied customers. Customer service is our number one goal—if you’re not happy, we’re not happy. If you live in the Pacific Northwest, make us your go-to shop for European automotive service and repairs.

Meister Werks 2019 New Years Garage Sale & Swap Meet

Meister Werks 2019 New Years Garage Sale & Swap Meet

 
We’re busting at the seams and making more room for servicing and working on vehicles. Lots of stuff for VW, Audi, Porsche, BMW and Mercedes Benz. Free for all!
 
Want to bring some stuff to sell. BYO Parts, tools and equipment. You get a 16′ x 8′ parking space to put what ever you want in it. Cars for sale, parts, tools what ever. Add both days for 2 day of swap.
Click here to reserve your spot today. Only 10 spaces available.

What we will have for the garage sale:

  • 2003 C32 AMG – Near perfect condition
  • Coolant machine
  • Skill Sander 1980s Metal housing
  • Mk2 VW GLI Recaro Trophy Office chair (electric version) Can be swapped into a car. (Right) $250.
  • Tools – hammers, Ryobi cordless drill / saw / light radio combo , and other basic wood working and general tools
  • Craftsman router (2) and mini router table
  • Air Lift 3P Air ride kit for Mk6 Jetta (IRS) / GTI – Ready to install, trunk mounted already to just put in the trunk. Carpeted and mounted tank / compressor / and manifold ready to go. Nice trunk setup. Dual Air Zenith OB2 Compressors, Powder coated tank red, with leather tank upholstery. Retail $4000 Asking $2000 obo. Used for approx. 5000 miles.
  • 16″ BMW Studded Snow Tires
  • Jet Mill JTM-1054R Knee Mill w/ Acurite DRO- Very little use. Comes with tooling, X, Y & Z power feed, rotary table, vice, Angle table, T bolt kit, Coaxial indicator Set, entire R8 collet set, 1,2,3 blocks, 2 sets of vice jaw plates 1/8″ & 1/4″, R8 quick chuck, end mills, drill bits and a lot of more items. Retailed with tooling over $25,000, Asking $12,000.
  • OMP Racing Seat
  • AM/FM Radio Stereo receiver with remotes, CD Player and DVD
  • 2000s Subaru Racing Seat Brackets
  • E36 Front Lower Bumper Splitter
  • H and R Sport Springs Red (PN: 29059) B8 Audi S4 / A4 – Retail $300, Asking $150
  • Subaru 5×100 to 5×114.3 Adapters $150
  • Chevy – 5×4.75 / 5×120 70.3cb (4) Spacers $150
  • 20% off Wheel Spacers 4×100 5×100 5×112 5×120
  • Extended lug bolts
  • Eibach Mercedes Benz 30mm 5×112 66.6 Spacers DRA – $140 w/ bolts
  • MK6 Jetta rear floor mat with adjustable cargo holders
  • Work Euroline Wheels 5×112 / 4×100, will fit Hondas and anything with 4×100 bolt patterns – w/ 3 tires
  • Mk1 Scirocco – Custom 3 piece wheels
  • 15″ – 20 hole BBS Motorsport Lips and Barrels
  • 15″ Ronal Tape Reel Wheels 5×112 66.6cb
  • 15″ Epsilon Wheel Lips – high gloss polished – one has a minor bend
  • Enkei 13″ 4×100 wheels
  • Volkswagen Mk3 Jetta 14″ Pirelli P-Slot Wheels (full 4 set) – 4×100
  • VW Mk1 GTI snowflake wheel (1) – $4×100
  • Wheel Boxes / Moving boxes – many w/ handles – Free!
  • Shop / Garage Banners – Bosch Rotiform Air Lift Falken NOS and more
  • H and R Sport Springs (E Class Mercedes)
  • KSport Coilovers (VW Mk5 / Mk6 Golf / Jetta / GTI and B6 Passat / CC)
  • Air Lift 3H / 3P Parts, sensors and kits
  • Air Zenith Reconditioned Air Compressors – 1/2 off!!!
  • Air ride fittings, airline and sensors
  • 50mm end link brackets
  • Mk1 Rabbit Scirocco Jetta parts
  • Mk1, Mk2, Mk3 4 Cylinder Reinforced Oil Pans
  • Mk1, Mk2, Mk3 4 Cylinder Shorty Oil Pans
  • VR6 Oil pans OEM and Reinforced Skidplate Pans
  • 2.0T Reinforced Oil pans / Skidplate Pans
  • Mk4 and B5.5 VW Metal Hood Pulls
  • Ryobi Cordless drill saw set
  • 16″ staggered DP Motorsport Wheels 5×108 1980s Ferrari Testarossa Fitment – could fit others: VOLVO, JAGUAR, FORD, LINCOLN, MERCURY, PEUGEOT, DODGE, AMC EAGLE, LAND ROVER and OLDSMOBILE vehicles.
  • Radi8 Wheels
  • 1/2 Ton Dolly / Beam Winch
  • 17ft x 4-1/2ft Mk5 VW Dealership Banner
  • Mk1 Scirocco Grills 2 – and 1 half grill
  • Mk1 Scirocco tail lights (2 sets)
  • Mk1 Scirocco signal lens Left
  • Mk2 Scirocco front air damn – Kamei X1
  • Mk2 Scirocco European Headlights
  • Universal fender fairs
  • Mk1 Early Rabbit / Golf Grill 1975, 1976. 1977, 1978 & 1979, chrome with light end covers
  • Early 1980s Coleman metal cooler in box green
  • T4 1998+ Eurovan headlight
  • T4 Eurovan tail lights
  • T4 Eurovan turn signal lens R/L
  • Mk1 VW 2 piece BBS RS wheels (2) No caps
  • BMW E90 Black Kidney Grills
  • Universal Round LED Foglights Accessory light for road or offroad
  • BMW E30 OEM Ecode Smiley headlights $400
  • 55 gallon liqui monly blue steel barrels $25ea
  • 3″ Exhaust VBand clamps with both sides, weld in $40ea (2)
  • T-bolt boost tube clamps powder coated and stainless 3″ & 2″
  • Vibrant Silicone Boost Hose
  • HDPE blue and black plastic barrels (no chemicals / rain barrels) $25 ea
  • Subaru 5×100 56.1cb w/ black steel wheels and studded snow tires Hankook I’Pike – 50% Tread left – $300
  • Ferretti 969 Wheels 18 x 8 – 5×112 – 66.6cb – Recently refurbished with lightly used tires – $800obo
  • Mk4 OEM European / Euro antenna with GPS Radio and cellphone antenna – triplex. Fits most VW and Audi’s with Fuba style roof mount antennas. Brand new. (Retails for $350 – asking $100)

Free oil change and alignment giveaways and more!

Discounts on Liqui Moly Products 10% off

  • Liqui Moly Sythoil Race Tech GT1 M3 / M5 Oil – 10w60 $11.99L
  • Liqui Moly Engine Flush
  • Liqui Moly Octane Booster
  • Liqui Moly Jetron
  • Liqui Moly Motor Oil Saver
  • Liqui Moly Ceratec
  • Liqui Moly Injector cleaner and More!
Our address is:
Meister Werks
618 Park Ave. N.
Renton, Wa 98057
Come down on Saturday Jan 26th and Sunday Jan 27th, 2019, 9am – 3pm – Both Days! We will have much more than this for sale.

Porsche 911 / 997 Twin Turbo Service & Inspection

Our customer, Vince, brought his newly acquired Porsche 911 / 997 Twin Turbo in for a service and inspection. Our inspection verified the vehicle is in good condition and does not require additional maintenance at this time which provided peace of mind and confidence in his purchase. Looking good!

Fuel Injector Cleaning & Testing

Fuel Injector Cleaning & Testing

Meister Werks now offers fuel injector cleaning and testing with our new Launch CNC-602a injector tester. This machine can test any range of RPM, leak test, spray pattern and many more. It can also do ultrasonic cleaning and back flush the injector to get 100% of all contaminants out of the injector.

How it works:

We install the injectors into the machine and do an auto test. This tests spray pattern, idle speed spray at 650 RPM, 4500 rpm and 6000 RPM. Furthermore, this test alone, we can determine wether or not the injector is good. If those test pass, we do a leak test which pressurizes the injector while it is closed. You can visually see if the injector is leaking.

If any of the tests fail, we will ultrasonically clean and back flush the injectors. After cleaning we will re test, after which, a full detailed report is presented to the end user prior to the test and cleaning is completion.

On this customers job, the intake runner flaps is faulty. This is the cause of the excessive carbon build up. The faulty runner flap failure is directly related to the bad injectors being driven on for 30,000+ miles w/o repair. Also excess carbon build up issues on Cylinder No.4, No.5 & No.6 was caused directly from faulty injectors. If problem is addressed sooner (at 19,000 miles), these issues would be present today. Current milage is 64,902 miles.

In the time lapse video below, you can see one of the auto tests we preform.

To make an appointment for your fuel injectors cleaning or testing service, call 425-254-0627 or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

 

New Powder Coating Oven – Up and Running!

New Powder Coating Oven – Up and Running!

New Powder Coating Oven – Up and Running – write up text here about this ‘n’ stuff. 8ft long x 6ft wide x 6ft tall. Our new oven is 8ft x 6ft x 6ft and has 600,000 BTU. This means it can get up to temp from ambient temperature to 400º in around 10 to 12 minutes.

We are also able to do small powder coating production runs for companies that do manufacturing or fabricating. This red prototype is a production run we may start doing here in the new future. It’s a motorcycle lift for your trailer hitch. Other production parts we coat are performance drift car parts, Lotus seat brackets to fix in a Mazda Miata / MX-5 and custom / OEM motorcycle parts from your local Harley Davidson dealership.

Some of the other things we powder coat are wheels. In fact we do a lot of wheels. Local Renton dealerships bring us there brand new cars to customize them before the customers takes ownership of them. We also can repair wheels and refurbish or restore wheels with our wheel lathe. Lastly we can also do fill,  re-drill and press in inserts for wheels to make different bolt pattern. We can also bore out center bores to fit your hubs.

Other items we can coat are valve covers, brake calipers, springs, sway bars, tie bars, air ride air tanks, hard lines for air suspensions or brakes, subframes and more!

Need a quote? Come by with your wheels and we would be happy to see your next project or production run.  Call us today at 425-254-0627 or email us.

Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.