2.0T Reinforced Oil Pan – Now Available

Meister Werks 2.0T Reinforced Oil Pan

Meister Werks 2.0T Reinforced Oil Pan is designed for lowered or air bagged vehicles. These pans will prevent you from rubbing though the steel OEM pan and prevent damage to the oil pan. These pans will save your oil pan drain and bung from being disfigured if you scrape. Our reinforced oil pan have 3/16″ / 5mm steel plates welded to the pan and are also designed to bend incase of a hard impact.

This pan can take heavy impacts, however these impacts may damage the pan. The pan WILL save your engine. We design these pans this way so the full impact transfers to the hot roll steel plate and not to the engine block. This will prevent the block from being damaged.

Power Coated Pan & More

Our pans are also powder coated wrinkle red. We do this incase you do his something the oil will be visible and you will be able to see if the pan is leaking.

If your car does not have a oil sensor, you have the option to add one. We can also provide you with bolts and silicone gasket.

Click here to order your pan today.

/by

Powder Coating Harley-Davidson Parts

Powder Coating Harley-Davidson Parts

Our long time friend Pete came in last week for powder coating Harley-Davidson chrome parts for his motorcycle bike. Since we can not powder coat directly over chrome, we knew we had a challenge.

We would need to etch the chrome in some way for the powder to stick. We ended up media blasting the chrome with 34 grit aluminum oxide. This takes about four times longer than any other material to etch.

We set up our automated media blaster with rotisserie to blast his items for about an hour. After that done, we did touch ups for around 30 minutes to get everything even and etched properly. We then cleaned and prepped the surface throughly and hung the parts for powder coating. We use Cardnal Industrial Finishes, BLACK Super Durable 90 Gloss, color code P009-BK180. This extremely glossy powder will withstands the riggers of the road and lasts five times longer than any other powder. As you can see the finish and the glossiness is pretty amazing.

To make an appointment to have us do powder coating Harley-Davidson parts, call 425-254-0627 – Ex 0, or email us. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

 

/by