Posts

2018 Mini Cooper Edition 7 – H&R Lowering Springs Install

2018 Mini Cooper H&R Lower Springs Install

Yesterday we completed an H&R lowering spring install on a 2018 Mini Cooper S Edition 7. This car comes from the factory with a sporty suspension, but not everybody likes the softer feel of it. The H&R lowering springs will change that spring rate to a slightly stiffer one while maintaining a comfortable ride. These lowering springs will lower the car approximately 1.1″ in the front and back.

Lowering springs and alignment.

Before, on the day of purchase.

Since this is such a new platform, there is little information available. However, the F56 platform is the same throughout all 2014-2018 Mini Cooper S models.

After removing the stock suspension and installing the lowering springs, we put the car up on the alignment rack to get everything straighten out. The camber was set a little in at 1.75º, this gives the car a little better handling characteristics in the corners. Tire wear should be minimal with this camber setting.

Over all, these springs give a much better ride quality and improved drivability. They perform much better than OEM springs and make the driving experience very fun.

If you want lowering springs on your car, call 425-254-0627 or email us to make your appointment. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

H&R 2010-2017 Lowering Springs MercedesBenz E-Class

H&R Lowering Springs

H&R Lowering Springs – 52726. Lowers car 1″. Install and alignment extra – Call for pricing

H and R W207 2Fits the Following Vehicles:

  • W207 Mercedes-Benz E-Class Coupe Convertible 2010, 2011, 2012 2013, 2014, 2015, 2016 & 2017
  • 2010-2016 Mercedes-Benz E350 4Matic V6.3498cc
  • 2010-2016 Mercedes-Benz E350 Base V6.3498cc
  • 2011-2013 Mercedes-Benz E350 Bluetec V6.2987cc
  • 2012-2014 Mercedes-Benz E550 4Matic V8.4663cc
  • 2010-2011 Mercedes-Benz E550 4Matic V8.5461cc
  • 2012-2017 Mercedes-Benz E550 Base V8.4663cc
  • 2010-2011 Mercedes-Benz E550 Base V8.5461cc
H and R W207 4 H and R W207 3 H and R W207 1

About H&R

Every spring produced by H&R comes from the ISO 9001 certified engineering and manufacturing facility in Germany. All  springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

These Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. These Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Features:

  • Lowers 1.5-2.0 inches on average
  • Superb ride quality