Zach is welding two cracks in these Rotiform wheels. Unfortunately they do not make a early casting of this wheel any more so the only real option was a repair. We can also refurbish all of your wheels and fix curb rash as well.

Welding-Wheel

Wheel Repair


About Rotiform

Rotiform designs and builds the finest cast and custom forged wheels for your automobile. Focused on style, strength, and aggressive fitment, the are the ultimate wheel.

All new Monoblock low pressure cast wheels with a fresh redesign and new concave profiles. Available in a wide variety of finishes and sizes to suit your vehicle.

These forged wheels are manufactured 100% in the USA using the finest 6061, t6 aluminum forgings. Tailored specifically for your vehicle and engineered to exacting standards, these forged wheels built for style, durability, and performance.

Click here to contact us for more info.


 

Zach staying organized while doing a Audi A4 Quattro 1.8 T head gasket the other day – at Meister Werks European & Import Renton, WA 1 block south from The Renton Landing.

Zach Head Gasket

It must be BMW 7 series month. One of our customers brought his in his new 745Li purchase for some much needed service. Brake flush, coolant flush & check engine light diagnostic. After a thorough investigation, we found that the codes were there from the previous owner and there was nothing to be worried about.
745li Service

Engine Coolant Flush

The coolant system is responsible for combating the heat produced by your BMW engine to help keep everything under the hood from getting too hot. If this system isn’t working as it should, you run the risk of overheating, severely damaging your engine, evening causing it to fail and you to be stuck on the side of the road. Obviously, preventing your BMW from reaching this point is ideal, for both your vehicle and your wallet.

Meister Werks European & Import in Renton, WA includes a coolant check as a part of our standard 30 Point Inspection, and you may see a cooling system flush as a part of your BMW Preventative Scheduled Maintenance.

Cooling System Warning Signs

Make sure you have yourMeister Werks European & Import in Renton, WA inspect your engine’s cooling system if your BMW begins to show any of the following signs:

  • Your dashboard temperature gauge consistently runs between normal and hot
  • The coolant light pops up on your dashboard
  • Your interior heating system isn’t working right
  • Grinding sounds from under the hood
  • Coolant puddles under your car
  • Steam coming from your engine

What is a Coolant Flush?

If you need a coolant flush, our service staff will remove the coolant from the radiator and replace it with genuine BMW recommended engine coolant. It’s possible that if you catch the problem early, your BMW may not need a full coolant flush, but simply to have the coolant refilled. Because the possibility of severe burning and scalding exists while working with your engine’s cooling system, it’s important that you don’t remove your radiator cap unless your BMW engine is completely cooled. If in doubt, leave it to our experienced service technicians.

When you bring your new or pre-owned BMW into Meister Werks European & Import in Renton, WA, we will include a check of your cooling system and engine coolant as a part of our multi-point inspection at no cost. If you do need to have the coolant flushed in your BMW, our service staff will work with you to make sure you can take advantage of any coolant flush specials we may be offering.

This is a prime example of what the wrong antifreeze in your car will do. The triangular shaped ducts are for coolant to run through your engine. As you can see it is extremely corroded and this one specifically is completely clogged. This ended up warping the head due to lack of cooling to this cylinder. The bottom right photo is what it should look like.

21587240_1416510605064261_7989141634709508862_o

 


Using the Correct Coolant / Antifreeze

Using the correct coolant /antifreeze in your car seems like a frivolous and unnecessary thing to worry about. However in most European cars this is not the case. You must use the correct type in your vehicle or else damage could occur over time. Putting the wrong brand in can lead to component failure such as clogged radiator / heater core, water pump failure and blockages in the cylinder head and engine block.

As you can see from above the wrong coolant was used in this engine and lack of coolant flushes over time will result in this kind of damage. In this instance, it completely clogged the coolant ports that flow into the cylinder head causing the head gasket to fail and warping the head. A simple cooling system flush at Meister Werks every 50k would have solved this problem. Also using green prestone or over the counter products you find at the gas station is the wrong antifreeze. Specifically this car needs G13 or pink antifreeze. VWs and Porsches need the same thing. BMW uses proprietary blue antifreeze, early VWs use Blue G12 and some Mercedes use a special yellow antifreeze / coolant.

If you have any question about the type you need in your car, feel free to E-mail or call us at 425-254-0627 and we can suggest the correct type for your vehicle.

Switchpath Installation of the Audi R8 Spider AWE Tuning Switchpath Exhaust. Exhaust example sounds of before and after the install, as well as open pipes and muffled pipes while the car is running.

#r8 #audir8 #r8spyder #exhaust #awetuning #switchpath #tuning #v8 #exhaustsound #custom


SWITCHPATH AWE TUNING R8 4.2L AND STRAIGHT PIPE PERFORMANCE EXHAUST SYSTEMS

(SKU: GRP-EXH-AUR842SPS1)

SwitchPath™ or Straight Pipe. Choose your weapon:

  • Design allows driver to select volume
  • Straight Pipe option for those who like it loud
  • In-cabin remote toggle for SwitchPath™ Exhaust
  • Power gains of +20 hp / +16 ft-lb peak crank
  • 25 hp / 28 ft-lb @ 4700 rpm
  • 24 lb weight savings with SwitchPath™ System
  • 50 lb weight savings with Straight Pipe Performance Exhaust
  • Perfect Fitment – Guaranteed

Remember the first time you saw an R8? Your reaction was probably something along the lines of, “what is THAT?” Well, same for us.

From that moment forward, our work was cut out for us – we had to create a masterpiece for the masterpiece. Introducing two serious options for your R8:

The AWE Tuning SwitchPath™ Exhaust

The Audi R8 4.2L SwitchPath™ Exhaust sets a new standard. Beyond the hand crafted detail that is standard for every AWE Tuning Performance Exhaust, this one packs a little something special: The R8 4.2L Exhaust incorporates a proprietary mechanical valve system that controls sound volume:

  • Under part throttle and idle, valves route exhaust gasses through a central muffler, keeping sound tame and drone free.
  • At 3/4 throttle application and more, the valves open and the system is unleashed – going into “straight pipe” mode.
  • An in-cabin mounted electronic SwitchPath™ Remote toggles the mechanical valves between “normal” and “straight pipe mode.” Practical.

The SwitchPath™ Exhaust line has set a new bar. SwitchPath™ Exhaust highlights include:

  • Designed and manufactured in-house at AWE Tuning
  • Crafted from T304 stainless steel
  • Uses Factory Tips
  • No CEL with full system or straight pipes
  • German Engineered control valves
  • CNC machined V-Band connections
  • One piece, full bolt on system means easy and reversible installation
  • Programming optimized for R8 engine characteristics
  • Lifetime Warranty

AWE Tuning R8 4.2L Performance Straight Pipe Exhaust

Do you find our R8 4.2L V8 SwitchPath™ Exhaust too docile for your tastes?

Meet the AWE Tuning AWE Tuning R8 4.2L Performance Straight Pipe Exhaust.  This system unlocks the same impressive power gains of 25 hp and 28 ft-lbs as our SwitchPath™ Exhaust System, but sheds even more weight over the stock exhaust system, for a total weight loss of 50 lbs. Be warned, though: The sound from the straight pipes is not for the faint of heart, small children, or small pets, and there are no “switching options” available with this addition.

Scared? Take a step back to the head-turning yet sophisticated SwitchPath™ Exhaust.

AWE Tuning stands by this product with a lifetime warranty, however, the straight pipes cannot be returned or exchanged based upon sound satisfaction.

For racing use only

Please note that due to the elimination of catalytic converters, this exhaust is legal only for racing vehicles which may never be used upon a highway.

If you have an R8 4.2L and you’re looking to make one of the most meaningful evolutions available, this is your move.

A customer Audi S5 is in for an alignment. Our courtesy 30pt inspection also found the brake fluid was well above 4% moisture content which may be in soon for more service. Behind, S550 Mercedes Benz in for a inspection – at Meister Werks European & Import Renton, WA 1 block south from The Renton Landing
.
#audi #s5 #alignment #brakefluid #brakes #inspection#mercedesbenz #s550 #service #maintenance #repair #3sdm

IMG_3935


History

The Audi S5 is the high-performance variant of Audi‘s A5. It is also the coupé, cabriolet, and five-door fastback versions of the fourth-generation (B8) Audi S4 saloon and estate models.

Like all Audi “S” cars, they are only available as standard with Audi’s quattro four-wheel drive (4WD) system, here in S5 using aTorsen-based centre diff system.[1]

Most versions of the S5 are manufactured at Audi’s plant in Ingolstadt, Germany; they are available as a coupé, cabriolet, and five-door sportback, which was previously not available in North America until the 2018 model year, which was released in the United States in mid 2017. The cabriolets are built at Audi’s factory in Neckarsulm, Germany. The Chassis in an S5 and A5 are different.

S5 B8.5/8.5T (2013-2017)

The (B8.5/8.5T or Facelift) Audi S5 Coupé uses the 3.0 L Supercharged V6 TFSI engine producing 245 kW, previously used in the S5 Cabriolet and S4 Sedan/Avant since the 2010 model year. The other major change under the bonnet is the introduction of stop-start technology for better fuel efficiency. Audi claims an average fuel economy of 8.9 litres/100 km (compared to the current 12.6 litres/100 km in the V8 coupe and 10.7 litres/100 km in the Cabriolet). In 2017, Audi replaced the supercharged 333 HP engine with a single turbocharged 183 cu in, 2995 cc, 354 HP engine, an increase of 21 HP from the supercharged model. Although more powerful at low RPM, Audi made a decision to replace the supercharger with a turbocharger based on European driver’s preference for smaller, more efficient, yet powerful engines, a market which Mercedes and BMW have always lead.
      
Sportback (facelift)

As part of the mid-generational refresh, the S5 undergoes some major front-end changes, including a complete redesign of the headlights – this means new LED DRL’s, a brand-new grille loosely based on the 2012 Audi A6 grille and new fog lamps. Audi has also introduced a new rear diffuser that appears to be more cosmetic than the one found on previous models and updated LED tail light design.[6]

Inside, the S5 receives some new features. Dials in the center console get the chrome treatment along with the edges of the buttons for the windows, 4 Audi MMI control buttons and Audi’s 3G+ MMI which has a slightly refreshed interface and now features Google Earth maps. Audi has brought the shift knob from the RS5 to the S5. There is a shift from having four buttons down each side of the console, to just two with the addition of a Menu and Car buttons below the MMI control dial (Audi has removed the skip forward / backward buttons that previously occupied the space on either side of the back button). Lastly, a flat-bottom steering wheel style will have a new circular airbag cover as well as piano black trim.

– Source: Wikipedia


 

An Audi R8 is in the shop getting new exhaust, K&N air filters, powder coated calipers and a few other custom things – at Meister Werks Renton, WA 1 block south from The Landing

Audi 2012 R8 Spider


History

The Audi R8 (Typ 42) is a mid-engine, 2-seater sports car, which uses Audi’s trademark quattro permanent all-wheel drive system. It was introduced by the German car manufacturer Audi AG in 2006.

The car is exclusively designed, developed, and manufactured by Audi AG’s high performance private subsidiary company, Audi Sport GmbH (formerly quattro GmbH), and is based on the Lamborghini Gallardo platform. The fundamental construction of the R8 is based on the Audi Space Frame, and uses an aluminium monocoque which is built using space frame principles. The car is built by quattro GmbH in a newly renovated factory at Audi’s ‘aluminium site’ at Neckarsulm in Germany.

In 2005, Audi announced that the name of the successful Audi R8 race car would be used for a new road car in 2007, the Audi R8, based on the Audi Le Mans quattro concept car (designed by Frank Lamberty and Julian Hoenig), appearing at the 2003International Geneva Motor Show, and 2003 Frankfurt International Motor Show. The R8 development program began in 2004, Lamberty’s design being approved and frozen for production. Production body prototypes began field testing in January 2006. The R8 road car was officially launched at the Paris Auto Show on 30 September 2006. There was some confusion with the name, which the car shares with the 24 Hours of Le Mans winning R8 Le Mans Prototype (LMP). 6-time 24 Hours of Le Mans winnerJacky Ickx described the R8 as “the best handling road car today”.

It is also the first production car with full-LED headlamps.

-Source – Wikipedia


BMW 750Li in for a BMW Repair / ABS brake module. We can perform your BMW repair service and maintenance needs as well. – at Meister Werks Renton, WA 1 block south from The Landing.

21740326_1411445865570735_764955161507158479_n


History

The BMW 7 Series is a full-size luxury sedan produced by the German automaker BMW since 1977. It is the successor to theBMW E3 “New Six” sedan and is currently in its sixth generation.

The 7 Series is BMW’s flagship car and is only available as a sedan (including long wheelbase and limousine models). It traditionally introduces technologies and exterior design themes before they trickle down to other models in BMW’s lineup.[1]

The first generation 7 Series was powered by straight-6 petrol engines, and following generations have been powered by inline-4,straight-6, V8 and V12 engines with both natural aspiration and turbocharging. Since 1995, diesel engines have been included in the 7 Series range.

Unlike the 3 Series and 5 Series sedans, BMW has not produced an M model for the 7 Series (ie an “M7”). However, in 2014 an “M Performance” option became available for the 7 Series.


Fourth generation (E65/E66/E67/E68; 2002–2008) BMW 750Li

 • 

Facelift BMW 730d (Germany)

The E65/E66/E67/E68 is the fourth generation 7 Series, which was produced from 2001 to 2008. The model range consisted of standard length and long wheelbase (“Li” models) sedans.

The E65/E66/E67/E68 was the first BMW to include iDrive, “flame-surfacing” exterior styling, active anti-roll bars, a 6-speed automatic transmission, an electronic Smart Key (dispensing with the traditional metallic key) and night vision. The 760i model was the world’s first production V12 engine to use direct injection.

-Source: Wikipedia


TECH:

Know your car’s maintenance intervals and keep up with service

Each vehicle has a maintenance schedule, outlined in the owner’s manual.  Be sure you read and understand the schedule.  Items that require regular maintenance include the car’s fluids, tires, brakes, and filters. Oil and air filter changes are particularly important to keep the engine running efficiently.

Did you know? These days experts say that you only need to change your oil every 5,000 miles (not every 3,000 miles like 10 – 15 years ago)? A good rule of thumb is: If the vehicle is a 2003 model or newer, it’s fine to change the oil every 5,000 miles.

New Equipment –
Even Better Service at The Renton Landing!

Front of Building


New equipment, means even better service for your vehicle at The Renton Landing!

shop

 


 

AC 1AC Service Machine

We now offer full service on your air conditioner at The Renton Landing. Air not blowing cold? Schedule an appointment for an AC check to get your air blowing cold again! Also a friendly reminder, if your AC will not blow cold you may have defrost issues in the winter.

 

 

 

 

 


BalancerTires, Mounting and Balancing

While your vehicle is in for service, we can also take care of your tire needs! If you need new tires, or even just a rotation or balance, our team has you covered.

 

 

 

 

 


Tire MachineTire Sales

Looking for new tires? We have several brands available at The Renton Landing, with something to fit every budget. Keeping your vehicle safe on the road has never been easier! We can easily take care of your tires while you are in for your next service.

 

 

 

 


Keep It Running

Keep It RunningSchedule your vehicle maintenance in Renton, WA

It’s crucial to stay current with your car’s service schedule. A properly maintained engine will ensure a long lasting future for your vehicle and less costly, time consuming repairs down the road.

At Meister Werks European & Import, our team members will inspect and service your vehicle’s most vital systems in Renton, WA. From fluid changes and fluid flushes to air filters and tire rotations, we’ll keep you cruising smoothly to work and play— and back again!


Three Reasons to Get Your Car Serviced RegularlyGETTING YOUR VEHICLE MAINTENANCE IN RENTON, WA, BY MEISTER WERKS EUROPEAN & IMPORT IS A SMART CHOICE FOR THE FOLLOWING REASONS:

1. It can prevent larger problems. For instance, failure to keep your car’s engine oil clean can eventually lead to clogs in the pistons and carburetor. Get service now to save major money on parts and labor down the road.
2. It can uncover more serious issues. Having your car regularly serviced by a specialist who knows what to look for is a good way to discover problems early on, before damage to your vehicle can occur.
3. It can save money on towing. It’s never fun to be the person whose car is broken down on the side of the highway, waiting for a tow company. At Meister Werks European & Import, we’d rather service your vehicle than tow it!


 

sesBMW Service Engine Soon Light On?

What you need to know about your Service Engine Soon light:

  • It does not mean you need an oil change.
  • S.E.S. lights come on when something causes the engine to not run correctly.
  • There is only one light so there is no way of knowing if there are multiple issues without doing diagnostics.
  • Service engine soon lights can also be related to your transmission.
  • When the SES light comes on the performance of the engine will be lower. (Emission levels are a sign of engine performance, that’s why a check engine light won’t let your car pass state inspection if they test for emissions.)
  • Service engine soon, check engine, reduced performance and engine malfunction are all the same thing!

At Meister Werks in Renton, we get this question all the time, “My service engine light just came on and I think you forgot to reset the light after my last oil change”. We wish it was that simple. This light is not a oil change reminder. This is a Check Engine light or CEL. Typically this has something to do with a sensor, emission control or even the transmission. It is difficult to tell what the issue is without a complete scan of the vehicle’s Engine Control Module or ECM. Further diagnostics may be required after this test is complete.


service-engine-soon-light

A orange Service Engine Soon or SES light means that there is a problem with the way your car is working. It might seem to be running fine, but there is a problem. It’s nothing to be alarmed about, but you should make an appointment with us when you have free time. We will be able to scan your ECM and let you know what the problem may be.


service-engine-soon-light redA red SES light means that there is a serious problem and you should make a appointment immediately. There could be serious damage to your car and a diagnostic is required right away. If your car does not seem to be running right or any other lights or messages are displayed on the dash, turn the car off and have the car towed in. You do not have to call, just have it towed to Meister Werks at 618 Park Ave N, Renton, WA 98057. Just one block south of the The Landing next to Boeing.


For more information or to schedule your appointment, contact us at 425.254.0627 or email us.